The quick answer
A batten fence uses square battens instead of flat slats. Ours are 40 x 40mm, welded into the panel, with a standard 30mm gap between them.
The Welded Vertical Batten Fence comes 2200mm wide in 1200mm or 1800mm heights, from $519, in Black, Monument or White, made to order.
It takes its own post: the 50 x 100mm aluminium post, not the 65 x 65mm post our other fence panels are offered with.
The same batten style runs through a pedestrian gate, sliding gates and double swing gates, so the whole frontage can match.
What a batten fence is
A batten is a square or near-square bar. A slat or a picket is a flat strip: wide on its face and thin on its edge. A batten has depth as well as width, so each one throws its own shadow, and a run of them looks more solid from the street than the same fence in flat pickets, most of all when you see it from an angle.
In a vertical batten fence the battens stand upright, spaced evenly along the panel. The look is strong vertical lines with a regular rhythm, which suits contemporary homes, rendered and brick fronts, and boundaries where you want the fence to read as a deliberate feature rather than a backdrop.
If you are still choosing between profiles, our guide to slat, picket and blade fence styles covers the other three. Here is how batten sits beside them in our range:
| Horizontal slat | Vertical picket | Vertical blade | Vertical batten | |
|---|---|---|---|---|
| Infill | 65 x 16mm slats, laid flat | 65 x 16mm pickets, evenly spaced | Slim vertical blades | 40 x 40mm square battens |
| Standard gap | 16mm | 10mm | 50mm | 30mm |
| How it comes | DIY kit | DIY kit | Welded panel | Welded panel |
| Standard panel width | 2400mm | 2350mm | 2400mm | 2200mm |
| Panel from | $279 | $368 | $399 | $519 |
| Matching pedestrian gate from | $295 (no lock) | $399 | $569 | $569 |
All four come in 1200mm or 1800mm heights, in Black, Monument or White. The gaps are our standard spacing for each style, and any other gap is quoted.
Two differences matter when you plan. First, the batten panel is welded, so it arrives as one finished panel rather than a kit of parts to put together. Second, it is 2200mm wide, narrower than the slat and blade panels at 2400mm, so a run in batten takes more panels, and so more posts, over the same distance.
The Welded Vertical Batten Fence panel
The Welded Vertical Batten Fence is a welded aluminium panel of 40 x 40mm battens standing upright. It comes in two standard sizes:
2200 x 1200mm: $519
2200 x 1800mm: $659
Prices include GST. Each panel comes with four 40 x 40mm single lug brackets and 12 tek screws. Posts are bought separately, and the next section covers which ones.
Everything is made to order. The two standard sizes are the quicker ones, and a custom size is made to your measurements. The colours are Black, Monument and White. Colours on a screen are indicative only, so match from a sample in the yard before you order.
Because the panel is 100% aluminium, it will not rust, rot or warp, and the powder-coat finish is made for Queensland sun, humidity and coastal salt with very little maintenance. The aluminium carries a 10-year warranty.
Posts, base plates and brackets
The batten fence does not use the same post as our slat, picket and blade panels. It takes the Aluminium Inground Post 50 x 100 x 2.5mm With Cap, in three lengths:
1300mm: $59
1900mm: $75
2400mm: $90
Each post comes with a cap, in Black, Monument or White to match the panels. The post length follows the panel height: a 1200mm panel takes the 1300mm or 1900mm post, and an 1800mm panel takes the 1900mm or 2400mm post. On the product page, pick the panel size and only the posts that suit it are shown, and anything you add goes into the same enquiry.
Two other parts go with it. The Base Plate (Internal Fit) 50 x 100mm, at $25, is designed to sleeve inside these posts. If your fence line runs over a slab rather than soil, our guide to fixing fence posts on concrete sets out how base plates compare with core drilling. And if you need more than the four brackets that come with each panel, single lug panel brackets are $15 for a pack of four, with tek screws.
Before you count posts, set out the run on paper. How to measure for aluminium fencing walks through the method; with batten, work to the 2200mm panel width rather than 2400mm.
Privacy, airflow and wind
Privacy on any vertical fence comes down to the gap between the uprights. Our guide to slat spacing for privacy explains how gap size and viewing angle work together, and the same ideas apply to battens.
What battens add is depth. Look straight at the fence and you see the full gap between two battens. Move to one side and the 40mm sides of the battens start to cover the gap, and they cover it sooner than a thin flat picket would. So a batten fence tends to screen more from a neighbour's window or a passing car than it does when you stand square to it. The standard panel has a 30mm gap between battens, and any other gap is quoted, so if privacy is the main reason you are choosing batten, tell us how much you want to see through when you ask for your quote.
The gaps matter in wind too. A fence with open gaps lets gusts pass through instead of catching them like a sail, so less load reaches the posts and footings. If your block sits on a ridge, a corner or an open new estate, our guide to aluminium fencing on windy sites covers spacing, height and footings for exposed runs.
Height is the other half of privacy. In Queensland a fence up to 2m high generally needs no building approval, but front fences, corner blocks and character areas can carry extra council rules. Check your own address with your council before you settle on a height.
Gates that match
A batten fence looks finished when the gates carry the same line, and batten runs through three of our gate types.
Pedestrian gate. The Welded Vertical Batten Pedestrian Gate is a welded gate of 40 x 40mm battens, 1040mm wide, in Black, Monument or White, supplied with a stainless steel handle lock:
1040 x 1200mm: $569
1040 x 1800mm: $599
Both prices include the lock. The gate's page offers self-closing hinges, posts and a post base, and you can change the lock for another from our range at the difference in price.
Sliding and double swing driveway gates. Vertical batten is one of the four styles for our sliding gates and double swing gates. The standard heights are 1200mm or 1800mm, and the width is made to suit your opening. Each gate is made to order at our Slacks Creek yard in one of two builds:
Assembled: screwed together at the yard, ready to pick up in about a week.
Welded: no screws, rivets or drilled holes, ready in about 2.5 to 3 weeks with powder coating included, and the build we recommend for a sloping driveway.
Times depend on availability. Posts are extra. A pedestrian door can be built into a batten driveway gate, and a gate motor can be added, with the power connection done by your licensed electrician. Black, Monument and White are the standard colours, and any other Colorbond colour can be made at an additional cost. Every driveway gate is quoted free, to your opening.
Supply-only or installed
You can buy every part of a batten fence supply-only and fit it yourself, or have us measure, make and install it across South East Queensland.
Quotes are free and made from your sizes and photos, and standard products are usually quoted the same day. Quotes are valid for 30 days. For an install, we measure on site, and a call-out fee may apply for that inspection.
Installation work is led by our founder and director, who holds an active QBCC trade contractor licence (no. 15027695).
Pickup from our Slacks Creek yard is free. Delivery covers Brisbane, Logan, Ipswich, the Gold Coast, the Sunshine Coast and Toowoomba, at an extra charge quoted for your suburb.
On a sloping block, tell us the fall across the run when you send your sizes.
Frequently asked questions
What size are the battens?
40 x 40mm square aluminium battens, welded into the panel. The batten pedestrian gate uses the same 40 x 40mm battens.
What is the gap between the battens?
30mm on the standard fence panel and on the batten pedestrian gate. Any other gap is quoted.
How much does aluminium batten fencing cost?
The panel is $519 at 2200 x 1200mm or $659 at 2200 x 1800mm, including GST. Posts are $59 to $90 depending on length, and the matching pedestrian gate starts at $569 with its lock. Driveway gates are quoted free. Your total depends on the length of the run, the number of posts and gates, and whether we install it.
Is the batten fence a DIY kit?
It is not a kit of parts: the panel is welded and arrives in one piece, with four brackets and 12 tek screws. You can buy it supply-only and fit it yourself, or have us install it.
Can I get a batten fence in a custom size?
Yes. Everything is made to order. The 2200 x 1200mm and 2200 x 1800mm panels are the quicker ones, and a custom size is made to your measurements.
What colours does batten fencing come in?
The fence panel and the pedestrian gate come in Black, Monument or White. Batten driveway gates come in the same three as standard, or any other Colorbond colour at an additional cost.
Can my driveway gate match a batten fence?
Yes. Vertical batten is one of the four styles for our sliding and double swing gates, so the fence, the pedestrian gate and the driveway gate can carry the same batten line.
Working out what your fence line needs? Tell us the run and the height and we will quote it, supply-only or installed.
